-40%

Sensor Current Dc 0-30A 0-30V Integrated ACS715 0-5V Arduino Compatible

$ 45.18

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Condition: New
  • MPN: POLOLU-1186
  • Refund will be given as: Money Back
  • Brand: POLOLU
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No

    Description

    Sensor Current Dc 0-30A 0-30V Integrated ACS715 0-5V Arduino Compatible
    The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
    Integrated DC 0-30A 0-30V current sensor ACS715 0-5V Arduino compatible
    MANUFACTURER: POLOLU
    REFERENCE: POLOLU-1186
    EAN CODE:
    Hall effect DC current sensor 0-30A load voltage 0-30V integrated ACS715 voltage output 0-5V Arduino compatible power supply 4.5-5.5V DC.
    MANUAL DC current sensor with hall effect 0-30A load voltage 0-30V integrated ACS715 voltage output 0-5V Arduino compatible power supply 4.5-5.5V DC. This current sensor is a carrier board or breakout board for Allegro's ACS715LLCTR-30A-T Hall effect-based linear current sensor; we therefore recommend careful reading of the ACS715 datasheet (593k pdf) before using this product. The sensor operates at 5 V and has an output sensitivity of 133 mV / A. The board ships fully populated with its SMD components, including the ACS715, as shown in the product picture. The following list details some of the sensor's key features: Designed for unidirectional input current from 0 to 30 A, but the sensor will provide meaningful feedback for currents as low as -1.5 A, and the robust IC can survive up to five times the overcurrent condition. Conductive path internal resistance is typically 1.2 mΩ, and the PCB is made with 2- oz copper, so very little power is lost in the board. Use of a Hall effect sensor means the IC is able to electrically isolate the current path from the sensor's electronics (up to 2.1 kV RMS), which allows the sensor to be inserted anywhere along the current path and to be used in applications that require electrical isolation. 80 kHz bandwith that can optionally be decreased by adding a capacitor across the board pins marked “filter”. High accuracy and reliability: typical total output error of ± 1.5% at room temperature with factory calibration, an extremely stable output offset voltage, and almost zero magnetic hysteresis. Automotive-grade operating temperature range of -40 ° C to 150 ° C. The pads are labeled on the bottom silkscreen, as shown in the picture to the right. The silkscreen also shows the direction that is interpreted as positive current flow via the + i arrow. This version is marked with a black X. We also sell a ± 5A bidirectional version and a ± 30A bidirectional version of this board; you can distinguish these versions by reading the text on the IC or by looking at the color of the X on the bottom silkscreen. Electrical connections The sensor requires a supply voltage of 4.5 V to 5.5 V to be connected across the Vcc and GND pads, which are labeled on the bottom silkscreen. The sensor outputs an analog voltage that is linearly proportional to the input current. When Vcc is 5 V, this output voltage is offset by 500 mV and increases by 133 mV per amp of input current. The output voltage decreases linearly below 500 mV for currents as low as -1.5 A. Manufacturer POLOLU Type of current sensor Supply voltage 4.5 ... 5.5V DC Integrated circuit ACS715 Current measurement range DC 0 ... 30A Sensitivity of the survey current 0.133V / A Dimensions of the plate 17.8 x 20.3mm Information The product is not a complete device, it is only a component Additional information Gross weight: 2.7 g
    Why
    Mec
    tronic
    STORE
    ? Few and simple principles.
    All products are shipped via the best national couriers such as SDA, GLS, Poste Italiane, BRT and DHL. To facilitate delivery, you will be asked for your telephone number when ordering, allowing the courier to contact you in case of any problem or eventuality in the delivery. For any delivery needs you can contact us.
    ALL SHIPMENTS ARE 100 TRACEABLE
    Not home during the day? We have the possibility to deliver to the post office near your home or to a Puntoposte! Write the delivery point in the address.
    PAYMENT
    Credit cards are also accepted with transactions always made on the secure payment site PayPal. No information about your payment method is shared with us to ensure maximum security.
    A REGULAR TAX INVOICE IS ISSUED FOR THE PRODUCTS SOLD IF REQUIRED AT THE TIME OF PURCHASE.
    WITHDRAWAL AND WARRANTY
    All our products are guaranteed both on delivery and in the time of use. For original defective products we carry out the free replacement of the product. The warranty has a duration of 2 years for individuals and 1 year for companies / businesses. Remember to keep the sales invoice and the original packaging of the product with all accessories aside! If you are not satisfied with a product, you have 30 days to withdraw from the purchase and receive a refund for the purchase of the product.
    TECHNICAL ASSISTANCE
    What differentiates us from other sellers? We are an electronics company with technicians dedicated to solving your doubts or problems with our products. No waiting on the phone or call center: you can contact us by phone, whatsapp, email or fax, the references can be found at the bottom of the page. Our experience is at your service to help you in the choice and use of the products on sale.
    FEEDBACK
    Feedback is important to us and to you. Therefore we ask you to report any problems in the sale and to contact us before the release of negative or neutral feedbak. Remember to put 5 stars in your feedback if possible on all fields to always guarantee the service we offer. As you can see, the way to contact us is clear and simple, to quickly resolve all problems with our products.
    ELECTRONICS - HOME AUTOMATION - REMOTE CONTROLS - AUTOMATION AND MECHANICS - SOFTWARE REALIZATIONS
    Prestalia
    e-commerce solutions.
    MANUAL DC current sensor with hall effect 0-30A load voltage 0-30V integrated ACS715 voltage output 0-5V Arduino compatible power supply 4.5-5.5V DC. This current sensor is a carrier board or breakout board for Allegro's ACS715LLCTR-30A-T Hall effect-based linear current sensor; we therefore recommend careful reading of the ACS715 datasheet (593k pdf) before using this product. The sensor operates at 5 V and has an output sensitivity of 133 mV / A. The board ships fully populated with its SMD components, including the ACS715, as shown in the product picture. The following list details some of the sensor's key features: Designed for unidirectional input current from 0 to 30 A, but the sensor will provide meaningful feedback for currents as low as -1.5 A, and the robust IC can survive up to
    MPN
    POLOLU-1186
    EAN
    Non applicabile
    Marca
    POLOLU
    UPC
    Non applicabile